• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

IP throttle shaft leak fuel drainback?

cucvrus

Well-known member
11,447
10,348
113
Location
Jonestown Pennsylvania
Yes it will. Anywhere it gets air will cause it to drop the fuel prime. Anywhere. The entire fuel supply system must be air tight.
 
Last edited:

Chaski

Active member
684
56
28
Location
Burney/CA
Excellent. Make sure you mark the advance cam so you put it back on the throttle shaft in the exact same spot. There is a KD tool made for it that references the cam to the crosspin in the throttle shaft. You can make one out of epoxy putty.

Also make sure you place the top back on the pump correctly as to not have a wide open throttle runaway. Have fun!
 
Last edited:
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks