Today I was sick (cough cough) from work for the morning to try and get caught up on some things. One being driving next door to check out some the vehicles I am thinking of bidding on. Anyways the winch truck had dead batteries, so I jumped off my CUCV to get her running. I did the usual hydrolock checks and such, and then started her up. She made the worst whoop whoop whoop noise while running, and was shooting junk out the stack. After about 20-30 seconds of this I noticed that there was no oil pressure, so I shut her down fast. While looking a round to see if anyone one was around that saw me start this to blame me for destroying it. I did not see anyone so I checked the dipstick again, and it was low but ok. I cranked her up again, and I finally got oil pressure. The oil pressure just barely got past 10psi though. This just goes to remind me you never know about some of this stuff unless you check it out, and even then be watchful.
If anyone needs any info on the trucks at Richmond I can help you from my notes. I will help with the ones I am not bidding on. The pictures there are good, but they did not bother to mention important things missing.
If anyone needs any info on the trucks at Richmond I can help you from my notes. I will help with the ones I am not bidding on. The pictures there are good, but they did not bother to mention important things missing.