• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

Just rebuilt PCB, still no power to dash or starter

kendelrio

Well-known member
Steel Soldiers Supporter
2,598
8,190
113
Location
Alexandria, La
All- just rebuilt my PCB according to Wes' video, reinstalled and I have the same symptoms. No voltage to dash or starter system.

Batteries are charged.

Where do I start troubleshooting now?

If anyone knows and wants to call, my number is 3183329703.

Thanks in advance
 

kendelrio

Well-known member
Steel Soldiers Supporter
2,598
8,190
113
Location
Alexandria, La
OK, following power flow, I'm not getting 24vdc to the PCB.

I had at one point disconnected my battery switch and in the course of doing that, have mixed up my wires. Using continuity checks with my meter, I cannot find the wire that goes to the pcb and am searching tms. Anyone have the numbers for the switch handy? I know the hot wire is 81A.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks