• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Libby 300 amp welder with 4A084 engine - need used parts

chevy43

Member
31
0
6
Location
Santa Cruz Ca.
I have a Libby LT0-300 welder. It has low hours and runs well and welds but it has 3 broken brush springs. Anybody have one for parts?

Anybody have a running one that you could check the open current voltage on the welding lugs with the setting at high? I'm getting 70 volts but it is marked 80 OCV. Does not appear to be related to the brush springs I mentioned above.

Thanks,
T.
 

chevy43

Member
31
0
6
Location
Santa Cruz Ca.
I have the Federal stock # 5360-406-4554. I googled it and got a bunch of aero space suppliers. I sent some email parts request but my experience has not been good with them before unless you are going to spend over 100k or so.
 
Top