dherman304
Member
- 30
- 50
- 18
- Location
- Texas, DFW
Hello all, I wanted to install an LED light next to my light switch to let me know if I left the lights on. My thought was to splice a hot wire once the top switch was moved to anythign other than "Off" using the picture below I thought wire "E" would be the one to use but it only illuminates in some positions, NOT while in Serv. Drive which is the main reason I wanted this indicator.
Anyone have any ideas what wire to splice into to get this job done?
![1690840439435.png 1690840439435.png](https://www.steelsoldiers.com/data/attachments/657/657878-8a4a012e568429e79f13b9bb8f4e6cb6.jpg)
Anyone have any ideas what wire to splice into to get this job done?
![1690840439435.png 1690840439435.png](https://www.steelsoldiers.com/data/attachments/657/657878-8a4a012e568429e79f13b9bb8f4e6cb6.jpg)