Lighting / electrical problem

[Jim Deggys]

I retired from the Army a few months ago and am converting a Deuce into a food truck. I know, crazy! My auction M35a3 arrived last week and the repairs have began. It is running, sounds good, and has lots of rust spots to repair.

My first head scratcher, None of my warning lights, buzzers, turn signals, tail lights, or head lights work. I assume all of these problems are linked to one issue like a fuse or something. Any suggestions?

Thank you

 

[mattchef10]

Not so sure about the electrical problems your having but i am in the middle of converting a deuce into a food truck aswell. You can pm me if you like to bounce some ideas about the conversion. Good luck with your business! Keep your truck out of Florida

 

[Recovry4x4]

Not to sound snide but are you familiar with the 3 lever light switch?

 

[Jim Deggys]

Not to sound snide but are you familiar with the 3 lever light switch?

Im not "familiar" with it, but I did turn every combination on the 3 lever switch I could think of and no luck. The engine was running and power was applied, I have never drove a Deuce so its possible Im missing a step.

 

[TGP (IL)]

Download the TM's from the download section here if not already done so.
The headlight switch controls the turn signals and other lights.
However you stated no warning or buzzer so I would check the Master switch
And wires behind it.
Have seen where the switch would power some things but not all of them
Due to faulty switch or bad wire connections at the switch.
Tom