RIDEBANSHEE
New member
- 15
- 0
- 1
- Location
- Nebraska
As stated im swapping a 93 NV4500 into my m1028. I didn't want the slave down low on the right side so I ordered a bellhousing from Advanced Adapters. I got it all in but am having problems. My starter will not go in at all. I used a 6.5 flywheel. I want to retain 24v so I'm just wondering if anybody has had this problem or does anyone know of a smaller 24v starter. Or a starter without a nose-cone.
Thank you
Thank you