M108 crane parts

[firefox]

Who can I buy M108 parts from that wont cost me an arm and a leg? Who do you prefer buying parts from?
Right now I need some simple things like seals, but I am not sure what problems I am going to run into.
I have replaced most of the hoses and modified the connectors so they will work.

Thanks,
Bruce

 

[Westech]

this should be in the Deuce not the Early deuce section. The Early deuce section is fore the GMC type.

 

[Recovry4x4]

His M108 bed is on an early deuce. I say it could go in either category but there would be more M108 owners in the other forum,.

 

[BKubu]

Forget price when looking for M108 specific items and just be happy IF you can find what you need.

 

[firefox]

I wasn't sure where to post it since there wasn't an M108 specific forum, so please feel free to move it to the deuce section.
I understand what you are saying Bruce, but still need some leads to where to buy parts.
Thanks everyone!
Bruce

 

[hndrsonj]

I would try memphis for new parts. Hawthorne tractor or SECO for used parts.

 

[AMGeneral]

I would try memphis for new parts. Hawthorne tractor or SECO for used parts.

I second Memphis for new parts IF you can get them,last seals I got for the M62 boom took 6 months to get here,from Europe!!

 

[firefox]

Thanks guys!
Bruce

 

[Stretch44875]

The seals for the hydraulic cylinders will be at any good hydraulic shop. If you can get the seal or bearing part numbers off the old parts, a bearing shop will be able to match them up. And if you find a 2 outriggers, I am in need of them.

Dennis

 

[gimpyrobb]

I found a place that has the 108 bed. It does not have the out riggers, but most of the other stuff. Let me know what you are looking for.

 

[Recovry4x4]

Cylinders here! Is the bed in Ohio?

 

[gimpyrobb]

Yup, exit 84 or so off I71. I'm pretty sure they are there, but the bed is not in the best shape.

 

[firefox]

Not sure what I will need until I bring the crane on line.
The boom lift cylinder has some bad scratches and pitting in one place near the bottom so I am not sure how this is going to go. I may have to replace it if I can't polish it up.
Bruce