• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

M1088 battery wires

gavland

New member
44
0
0
Location
Doylestown/Pa
I just got a m1088, but was missing all the batteries.
it has 4 wires coming from truck and 2 from jump start cylinder.(total 6)
if I hook them up like you would think, all 24V way it does nothing.
but if I hook one of the wires on 12V way it starts rite up, iam so lost(nothing like my m925)
if any one has this new tipe truck and can show me a picture that would be great:lol:
or the TM that would show me, cant find the rite one.
oh and is there any batteries that I can buy that will fit in the battery box? square battery holes
 

gavland

New member
44
0
0
Location
Doylestown/Pa
picture on box only shows 2 jumper wires and 2 wires to truck +- didn't help with the other two wires I still have left over.
and picture shows 24V wiring. no help on the 12v way I have it to start it. hopping I don't burn anything up with way I have it!!!!!!
 

73m819

Rock = older than dirt , GA. MAFIA , Dirty
Steel Soldiers Supporter
In Memorial
12,195
320
0
Location
gainesville, ga.
It has a 12v/24v system, do NOT hook it up wrong, the electrics ARE 12v (computer, trans, some relays, ect.), starts on 24v, starter relay is 12v.
 

gavland

New member
44
0
0
Location
Doylestown/Pa
thanks I just read some thing that said 12/24V on them, so I guess that's whats going on.
just need to find a picture on whats what. I tried looking at wires to figure it out but still no clue since 2 off of alt. go to a box with more wires then to battery, figure its a regulator.
any one know of the TM it would be in, cant find it.
 

gavland

New member
44
0
0
Location
Doylestown/Pa
thanks, cant find any thing I want on tm's this will help. hope I can get a cheaper battery but probably not since there square.
only use deka batters at my work.
 

gavland

New member
44
0
0
Location
Doylestown/Pa
just hooked up two my regular batteries for now and it worked noticed that there is a small P on positive wire terminal and a N on neutral so picture and new find works like a charm.
THANKS SO MUCH
 

gavland

New member
44
0
0
Location
Doylestown/Pa
yes when I get to work tomorrow ill measure it and let you know if Suprman don't beat me to it.
I do know it sit higher than our 2000 mack tractor, would have to use tire inflation to lower tires to get under low bed trailer hock up.
 

awind

Member
33
1
8
Location
Saranac, NY
Anybody get a chance to measure the height? Looking at getting an M1088 this week but would like to know if would work for me. Thanks
 

gavland

New member
44
0
0
Location
Doylestown/Pa
from floor to top of plate when level its 63"
but that's with 395/85r20 tires, so it could be lower if you get smaller tires for it.
haven't got title yet but did some hill climbing up a dirt pile that I cant even walk up if I wanted 20 ft high and had no problem
truck rocks!!!!!!
 

Suprman

Well-known member
Supporting Vendor
6,861
694
113
Location
Stratford/Connecticut
It would be awfully slow with smaller tires. Mine does 57 tops. Good to know they can actually go offroad. Not too many places where I am to do it though. All the trails are jeep size I would end up stuck between 2 trees. GP takes a long time with paperwork. In CT I can just do a bill of sale over 20 years.
 

awind

Member
33
1
8
Location
Saranac, NY
Wow that's tall. Not practical for civilian trailers. Have a logging operation hoping to use this as truck in the roads. Have a M1078 and its a blast. Have lots of trails in the woods to use it on.
 

awind

Member
33
1
8
Location
Saranac, NY
Can you tell me the purpose of the Hydraulics on the M1088? I see a cooler on the rear and the hydraulic unit behind the drivers side front tire. Thanks
 

Suprman

Well-known member
Supporting Vendor
6,861
694
113
Location
Stratford/Connecticut
Air over hyd unit behind cab is used for cab and spare tire raise and lowering. Rear cooler on a tractor is aux trans cooler. My M1083 has an aux cooler hidden under the bed near the winch also.
 
Top