M109A3 Splashgaurds...Cheap

[Speddmon]

Hey guys,
I know this should be in the classifieds, mods feel free to delete if you like. I just wanted to take this opportunity to see if any members wanted some of this stuff before it hits the scrap yard.

I have about 16 Front splashguards for the M109a3 trucks. I have absolutely no use for them and I am going to scrap them probably the beginning of next week (8/10/09), but I hate to see good OD Iron parts hit the scrap yard when someone on here can use it. If anybody want's any they are $10 plus shipping. They are new in the boxes.

I also have about 50 seat pedestals that from what I can tell fit the M939 series trucks, same deal, I have no use for them, anybody wants them or knows someone who does PM me or they are getting scrapped. Same price $10 plus shipping. These are also brand new in the boxes.

Also have 2 rims, that I have no idea what they fit, they are 20" rims with no centers, brand new in the boxes. $20 each takes them, but they will have to be picked up locally or I can deliver within a reasonable distance for the price of gas money because they are heavy.

Like I said, I know this should be in the classified section, but if nobody wants any of this stuff it's going to the scrap yard in a week and I just hate to see good new stuff get scrapped if someone can use it, or needs it.

Thanks. Here are some pics for ya'll.

 

[Recovry4x4]

Can you get a measurin stick on those seat risers for me? That might be something I need!

 

[Speddmon]

can do. I'll post it up later today.

 

[scooter01922]

So, uh.....whats the difference between those splash guards and the ones on a regular deuce??

 

[Speddmon]

scooter,
the "V" bend in the guard going down the middle for one thing...the deuce has two bends each about a third of the way in. And the sides of these guards have a bend of about an inch on each side, where the deuce is just flat steel.

Recovry,
The measurements on those seat pedestals is about 24 3/8" long, 6 1/4" wide, by 2" deep. The welded female threaded stud is about 3 1/4" from the open end. See the pictures, if you need more measurements or info let me know.

 

[scooter01922]

Ah, thanks. Don't happen to have the deuce handy to go look at.

 

[Speddmon]

yeah, I read about your head gasket problem, sorry to hear that. I had to go check mine just to be sure of the differences myself. It would be nice if I could make use of some of them myself, it might turn this otherwise horrible day into something worthwhile.

 

[Speddmon]

Recovry4x4,

A quick edit for you...I did some more tracking and found those seat risers are used on the M60 bridge launchers, not the trucks like I thought.

 

[gimpyrobb]

Those "seat pedestals" would be a good start if someone wanted to make a set of tow lights. .02

 

[BFR]

I'm interested in a couple of the the splash guards, if they can hitch a ride to the GA rally. Anyone have room to bring them down?

 

[Speddmon]

BFR, I'll put you on the list, but there was already a lot of interest in them. I'm debating coming to the GA rally this year, I hope I can make it. Either way, I'll let you know if there are any left and if so, we'll get them to GA somehow. Send me a PM!!!