mthullm54a2
Member
- 34
- 1
- 8
- Location
- tonasket wa
Working on a m923 and the transfer case will not shift when air pressure goes above 60 psi but when I shut it down and bleed off the airtanks so it has no air pressure it shifts fine any ideas
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
M923 transfer case issues
- Thread starter mthullm54a2
- Start date
- 9,604
- 1,487
- 113
- Location
- mid- michigan
Some reading for you.
[h=1]transfercase is stuck in 2wd mode.[/h]
[h=1]M923 A2 HI LO Stiff shifting Problems[/h]
[h=1]M939 Transfercase shifting[/h]
[h=3]transfer lever button[/h]
[h=1]M925 transfer case posessed ? Will not shift above 65 psi in air system!!![/h]
[h=1]m923 transfercase help[/h]
[h=1]923 transfer case wont shift[/h]
[h=1]transfercase is stuck in 2wd mode.[/h]
[h=1]M923 A2 HI LO Stiff shifting Problems[/h]
[h=1]M939 Transfercase shifting[/h]
[h=3]transfer lever button[/h]
[h=1]M925 transfer case posessed ? Will not shift above 65 psi in air system!!![/h]
[h=1]m923 transfercase help[/h]
[h=1]923 transfer case wont shift[/h]
mthullm54a2
Member
- 34
- 1
- 8
- Location
- tonasket wa
Thank you