Chief22
New member
- 2
- 0
- 0
- Location
- Chickasha, Okla.
I have a 923 that when the park brake hand lever is in the up position and engaged the dummy light is off on the dash and the buzzer is on under the dash on the drivers side. When the park brake lever is down in the released position the dummy light comes on and of course the buzzer still stays on. Both are done with full tanks of air. Switch in hand lever seems to work, just working backwards and the buzzer never go's off. Just replaced the Haldex module above the center front axle due to the fact of dead short and blowing 15 amp fuse and ABS light staying on, but that has been cured and self checks now. Just got this issue with the parking brake lever. Any suggestions guys and gals?