Before shutting me out and locking my thread, Please consider this.... I have searched and refrained from asking this until I have read everything I could find in a reasonable amount of time. Its not like I have not tried to research this. I could just simply use a little help from this very knowledgeable community.
Once again, I fired up my mep-003a and was getting about 156vac from it. I posted this in a previous thread and got one response before it was shut down. The advise I got was to replace the 2n3584 transistor (a common culprit) which I did to no avail. I searched mep-003 high voltage , but did not find much about it. I searched several key words which I thought would lead me to an answer or even a direction. I also googled it. Any advice would be greatly appreciated.
Once again, I fired up my mep-003a and was getting about 156vac from it. I posted this in a previous thread and got one response before it was shut down. The advise I got was to replace the 2n3584 transistor (a common culprit) which I did to no avail. I searched mep-003 high voltage , but did not find much about it. I searched several key words which I thought would lead me to an answer or even a direction. I also googled it. Any advice would be greatly appreciated.