kd7ura
New member
- 2
- 0
- 0
- Location
- Snowflake AZ
Mep-017A has voltage problems found a thread on google leading to this site.
there should be a section in the forum here just for the mil generators. it would make things easyr to find
as for my question can any one identify the Zener silicon diodes listed as CR 9 and 10 in the TM 5-6115-332-34
on page 3-5.
part number is listed at same page but nothing on net to reference it .
CR 1,2,3,4 are replacable with NTE116 1N4001 / 1N4004 Si Diode, 600V 1A - NTE116
CR 5,6,7,8 are replacable with NTE5802 200 Volt 3A Rectifier DO27 - NTE5802
i got the numbers of the actual part, but cr9,10 are not readable
an idea of the amps and volts would help
i would really appreciat any thing close
thanks
there should be a section in the forum here just for the mil generators. it would make things easyr to find
as for my question can any one identify the Zener silicon diodes listed as CR 9 and 10 in the TM 5-6115-332-34
on page 3-5.
part number is listed at same page but nothing on net to reference it .
CR 1,2,3,4 are replacable with NTE116 1N4001 / 1N4004 Si Diode, 600V 1A - NTE116
CR 5,6,7,8 are replacable with NTE5802 200 Volt 3A Rectifier DO27 - NTE5802
i got the numbers of the actual part, but cr9,10 are not readable
an idea of the amps and volts would help
i would really appreciat any thing close
thanks
