- 2,248
- 3,931
- 113
- Location
- Pepperell, Massachusetts
AAMPS DCS Control Assemblies NSN 6110-01-588-4725
Cummins Part Number 04-20442
I currently have 6 available as of 3/9/25Cummins Part Number 04-20442
They will work in MEP-1030, MEP-1040, MEP-1050, MEP-1060, MEP-1070 Gensets
They automatically configure themselves when installed in an AAMPS genset.
The DCS's were tested in an AAMPS generator to verify Starting, Going Ready, Running under load, Parameter displays and Stopping.
See attached pictures of each during testing.
The DCS is the "brain" of the AAMPS generator. Functions include Starting and stopping sequences, Engine Governor Controller for Engine RPM, AC Frequency Control, Monitoring and display of all parameters, AC Voltage Regulation, Engine Cooling, Parallel Generator Operation, Periodic Maintenance Tracking and Fault Detection.
If you have an MEP-1030 through MEP-1070 it would be wise to have a known good spare on hand.
All of the DCS's functions are contained on a highly integrated circuit boards inside the unit.
The insides of a DCS...
The DCS automatically configures itself when installed in a MEP-1030 through MEP-1070 generator for correct operation.
Ships in original shipping box with original protective support cushions.
Ordering Information
Cost: $350 plus actual UPS shipping cost from 01463 in Massachusetts
Shipments are 24" x 15 x 12" 25 lbs
PayPal, Venmo & Checks accepted. Credit Cards by special request.
To order or have questions feel free to email me at: kurtklopp@gmail.com
Be sure to include the following information:
1) Name & Mailing Address
2) Payment Method
4) PayPal email address if using PayPal
Pictures of each during testing in my 1030.
Last edited: