Mep-802a glow plug source?

[Crabbie]

Does anyone have a source or part number for the glow plugs?

thanks!

 

[CDR]

What glow plugs?

 

[kloppk]

The part number is 186-6264.
Onan and Cummins....

 

[BlackhawkMTP]

The part number is 186-6264.
Onan and Cummins....

I bought some off the big auction site with this same exact part number and noticed that they say 12v on the box after I ordered it. Will it work in the 24v system?

 

[Guyfang]

If in fact, they are that part number, yes they should. There is 2 other numbers.

186-6201
364830
NSN: 4520-01-359-8114

 

[BlackhawkMTP]

If in fact, they are that part number, yes they should. There is 2 other numbers.

186-6201
364830
NSN: 4520-01-359-8114

Attached is the picture of the box. They are that part number so I assume they will work. This is the part number that they had in the TM that I looked at. I just didn't know if they made a 12v and a 24v version or if maybe they were 12v in series to create the 24v?

 

[Guyfang]

I dont think it will be a problem.

 

[Light in the Dark]

They are 12V units. I bought some from Gary @ DES... 12V is confirmed as what was installed in the units, 24V fired as wired.

 

[Ray70]

Everyone is correct.... you have the correct 12V plugs that you need. If you look at how they are wired you will notice that you need 12V glow plugs not 24V.
They are wired in series, in other words 2 in series for an 802 and 2 sets of series pairs for an 803.