Mr.Wolf
New member
- 1
- 0
- 1
- Location
- Greenville,NC
Well I finally did it and bought one, and it seems the one I picked wants to test me.
Im not the best diesel mech. but I know my way around a diesel engine.
So far..
Im looking at bent push rods, and some very sticky valves, which have all been ordered. I m sure there's going to be more to replace, and at this point, Intend to get it running again as it only has 733hours on it. Im thinking the problem started with a stuck relief valve which also has been ordered for replacement.
Also wanted to say thanks for letting me join here!!
Im not the best diesel mech. but I know my way around a diesel engine.
So far..
Im looking at bent push rods, and some very sticky valves, which have all been ordered. I m sure there's going to be more to replace, and at this point, Intend to get it running again as it only has 733hours on it. Im thinking the problem started with a stuck relief valve which also has been ordered for replacement.
Also wanted to say thanks for letting me join here!!
