• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

MEP-803 rubber seal between radiator and shroud

warf

New member
8
11
3
Location
Arecibo, PR
Hello all;

Had to remove my radiator to have it repaired. The orange rubber seal between the radiator and shroud was loose and comletely came off when I removed the radiator. I cant find the part on the TMs. Can they be glued back or can I buy something like "Trim-Lok Solid Rectangle Rubber Seal" to replace it?

Thanks
 

Ray70

Well-known member
2,332
4,935
113
Location
West greenwich/RI
You can do either. Try gluing it back on. You may want to use contact cement, apply to both surfaces, let dry then stick together.
That stuff is a silicone open cell foam, maybe 10mm square or so?
Anything remotely similar will work just fine.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks