• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Need 4A032 mufflers

Welder Sam

New member
1,430
6
0
Location
Glendale, Arizona
Mufflers are nice. Mine could stand a couple. At least 1. Both outlets are pointed forward! Yuk! One is a small round , nearly straight thru, job thats been tacked to a flange. If nothing else, some 1" 90's and rain caps would work.

Id like to know more about how you wired your starter
 

319

Lieutenant
Steel Soldiers Supporter
3,348
57
48
Location
Michigan
Mine had the starter and slave (two pin) recptacle, didn't take long to fry the starter. No other connections for a battery. Just as easy to pull start it as it is to drag out the slave cables.
 

Welder Sam

New member
1,430
6
0
Location
Glendale, Arizona
Good point. I did run across a 12v replacement starter online. Cant remember for the life of me where. My bobcat 250 uses 12v for starting. Theres a small pulley on the pump motor too.. theres options at least. Crank rope is mighty cheap to use and replace tho
 
Top