Need HELP Cb do not Raise

[daniauction]

I need help on how to replace or fix the cab hydraulic latch . The cab is in the lower positions and when I try to raise it leak from the lack as ypi can see on the attached picture.
It is almost impossible to insert a tool to remove the screws.
Appreciate any help
Thank you

 

[NDT]

Fix it right there. O ring kit on Ebay.

 

[GeneralDisorder]

Yep. Use a BIG socket to pull out the locking pin and replace the seals. Reinstall, fill the system, and lift the cab.

 

[Ronmar]

Seen right in your pic. Unscrew the big ass nut/cover that will release the spring holding it closed and also allow you to replace the seal…

 

[Ronmar]

You if course cannot lift the cab with that latch unsealed, and if you do get the cab up, you MUST install a cab support brace before you do any work on the hydraulic system…. You open that with the cab up and it could come down rapidly all by itself…