No Fuel at Injectors

[tgtaylor64]

I have searched this site and some of the TMs but cannot find the procedure for bleeding the injectors. I have fuel to the IP and have confirmed good pressure (~8 psi). The problem is, it won't start because I am not getting fuel through the IP to the injectors. Am I missing something?

 

[cpf240]

Bad fuel shut off solenoid on the IP? Bad IP?

 

[tgtaylor64]

IP shut-off solenoid clicks when red wire is connected and ignition on. Appears to be working. When it does start, the IP performs fine; smooth idle and plenty of power. Trouble is on cold start; warm start is not a problem. Considering rebuild but want to exhaust all options first and I am seeking to understand this system.

 

[Skinny]

How do you have no fuel at the injectors but yet it runs fine? If this is an intermittent no start regardless of temperature and time I would assume you have an IP solenoid starting to fail.

 

[phil2968]

You are probably getting air in the fuel system as it sits. I just had the same problem with mine. Once the air gets into the IP it takes some cranking to get it out. Find your air leak.