• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

oddboll jeep

richingalveston

Well-known member
1,715
120
63
Location
galveston/Texas
my buddy has a willys we believe is a 46 cj2a with some type of winch truck type frame post with pin holes which we think was for a cage it has a nasty front bumper with extended fenders on the front and a pto winch. we just pulled all the drums (a real PITA) on stud had to be drilled, threaded and a bolt put in it. we tried welding on studs and even welding the puller arm to the drum. putting a bolt in it worked.

here are some pics, the roll bar and back seat are welded to plates which now make up the top of the rear fender. otherwise we beleive everything else is origional

any info is appreciated.
 

Attachments

richingalveston

Well-known member
1,715
120
63
Location
galveston/Texas
the seats and roll bar are definately a recent redneck addition. however the bumpers, frame supports with post and fender extension look to be as old as the jeep.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks