Bobbed 923A2
New member
- 16
- 12
- 3
- Location
- Simi Valley Calif
Replaced oil pan gasket 923A2 8.3 cummins is there a trick to removing the pan without removing the oil pickup tube
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Oil Pan
- Thread starter Bobbed 923A2
- Start date
- 8,386
- 2,391
- 113
- Location
- Monrovia, Ca.
Jack the truck up from the bumper or frame, it might give you a bit more room to slide it out. Even if that won't work, it is only 4, 6mm bolts. DO NOT use silicone on the gasket when you go back together and use sealant on the joints of the block/gear housing and block/rear seal carrier. No silicone, use a silicone based adhesive, like GM valve covers use.