- 463
- 262
- 63
- Location
- Seville, OH
I've done some reading in similar topics, but as a new LMTV owner I'm still not sure what my next steps are.
https://www.steelsoldiers.com/showthread.php?174500-Park-Brake-Won-t-Apply
https://www.steelsoldiers.com/showthread.php?139836-LMTV-Park-Brake-not-working
following through those posts I have established this much.
1) under normal driving the brakes work
2) when all the air is dumped by opening the tank valves the brakes work
3) there is a dummy red glad hand without a vent on the front
4) with air in the tanks replacing the dummy with the vented glad hand there is constant air coming out of the vent
I can see what may be a check valve behind the bumper after the red gladhand.
What are my next steps to narrow down the problem/defective part? Can someone provide the link to the troubleshooting flowchart? I only have the Operators Manual TM here at home.
Thanks!
https://www.steelsoldiers.com/showthread.php?174500-Park-Brake-Won-t-Apply
https://www.steelsoldiers.com/showthread.php?139836-LMTV-Park-Brake-not-working
following through those posts I have established this much.
1) under normal driving the brakes work
2) when all the air is dumped by opening the tank valves the brakes work
3) there is a dummy red glad hand without a vent on the front
4) with air in the tanks replacing the dummy with the vented glad hand there is constant air coming out of the vent
I can see what may be a check valve behind the bumper after the red gladhand.
What are my next steps to narrow down the problem/defective part? Can someone provide the link to the troubleshooting flowchart? I only have the Operators Manual TM here at home.
Thanks!
Last edited: