-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Picts of 2 of my rides!
- Thread starter TedG
- Start date
BFR
Rocket Surgeon
- 2,330
- 42
- 48
- Location
- North Georgia
Nice! what size/brand/model are the tires on the mog?
jh1990
New member
- 393
- 0
- 0
- Location
- lancaster, pa; hinesville, ga
Nice looking Humvee, where did you get it and for how much?
M1075
Active member
- 3,589
- 6
- 38
- Location
- Oklahoma City
Holy COW, those rigs are SWEEEEETTTT. Does the Mog outperform the HUMVW or what? Are those Mog tires Continental 14.5R20 MPT?
M1075
Active member
- 3,589
- 6
- 38
- Location
- Oklahoma City
Ooops, I guess we were posting at the same time.
Mogs win hands down. Tight turning radius (tighter than jeeps) and funner to drive. Since they are work horses (backhoe and dozer blade, gvw 14,000lbs), the 406's are limited in speed...45 max. Hmmwv's can be obtained for $15K to $40K just depends on the condition and mileage. This M1037 has 3100 miles on it and is unmolested...fun toy truck to drive around in.
Attachments
BFR
Rocket Surgeon
- 2,330
- 42
- 48
- Location
- North Georgia
three way dump?
Yes, 3 way dump, dual hydraulics front and rear, pto front and rear. 6 cylinder 100hp NA diesel and 120hp by turning up the ip. It looks top heavy but it is not...CG is around frame height and they somewhat nose heavy without a rear load/implement.
Thanks for the comments!
Thanks for the comments!
clinto
Moderator, wonderful human being & practicing Deuc
Staff member
Administrator
Super Moderator
Steel Soldiers Supporter
Supporting Vendor
- 12,596
- 1,131
- 113
- Location
- Athens, Ga.
Dude, that is awesome!!!!!!!!! Now I want a 'Mog!!!!!!!!
Thanks for posting, we love pics.....
Thanks for posting, we love pics.....
motorolanut
Member
- 754
- 1
- 18
- Location
- Glenwood WV
Kick Ass!! and Welcome!!!
rizzo
Active member
- 2,841
- 8
- 38
- Location
- Port Huron, MI
awesome mog
pullthepin
New member
- 20
- 0
- 0
- Location
- Southern Indiana
Awesoe Shop,The M bed look's sweet hangin from the Mog!!!! Cool Pic
Welcome to the site!!
Gregg
Welcome to the site!!
Gregg
bigbee
Member
- 645
- 4
- 18
I don't see the mud-line up to the windshield on the Mog-Did you take the picture before the mud pit at the Custer ride? These guys might like to hear THAT story!
- 7,058
- 147
- 63
- Location
- Mid Hudson Valley NY
Nice Humvee, but thats a M998, NOT a M1037... the 1037 has a 6 or 9K winch......... If you need any humvee info, lemme know.. Nice to have another humvee owner here!
Hi emmando22,
Factory barcode and data plate say M1037 Shelter Carrier . M1038 is the winch model. This has/had the shelter carrier assembly in the bed.
Hi Brian,
Too embarrassed to tell it...but I will say this: It is the last time I lead the group in Ft. Custer Section 2A where they stick tanks and other larger lunkers! The picture is after the nose dive. 2 people 2 hours power washing, 60 gallons of flushing oil for crankcase, transmission, axels, portals. Kerosene engine flush and 3 oil filters, radiator core, propellor and clean underwear (kust kidding). Best part was it did not hydro-lock on the top side but full of crud on the bottom side. Thanks to David (rattlehead) for winching me out with all of his cable plus 2 straps...it was a long pull!
Factory barcode and data plate say M1037 Shelter Carrier
. M1038 is the winch model. This has/had the shelter carrier assembly in the bed.Hi Brian,
Too embarrassed to tell it...but I will say this: It is the last time I lead the group in Ft. Custer Section 2A where they stick tanks and other larger lunkers! The picture is after the nose dive. 2 people 2 hours power washing, 60 gallons of flushing oil for crankcase, transmission, axels, portals. Kerosene engine flush and 3 oil filters, radiator core, propellor and clean underwear (kust kidding). Best part was it did not hydro-lock on the top side but full of crud on the bottom side. Thanks to David (rattlehead) for winching me out with all of his cable plus 2 straps...it was a long pull!
Attachments
- 7,058
- 147
- 63
- Location
- Mid Hudson Valley NY
Opps, Im the moron! Sorry about that.
- 3,585
- 7
- 0
- Location
- Parkville, MD
If you do not mind what does a MOG with all the equipment go for? It looks to be very competitive with a CK Case and wondered about the difference in price.
No worries emmando22!
David, There is one on ebay with buy it now for $18K which seems like deal, else you might pay upwards to $25K. As always, depends on condition, hours on engine, number of implements included, location and how bad a person wants one! A front end loader with backhoe is just that...a work horse. A mog is that plus when you detach implements and you have a driveable go anywhere truck.
David, There is one on ebay with buy it now for $18K which seems like deal, else you might pay upwards to $25K. As always, depends on condition, hours on engine, number of implements included, location and how bad a person wants one! A front end loader with backhoe is just that...a work horse. A mog is that plus when you detach implements and you have a driveable go anywhere truck.