Pinion angle

[Bcurtman]

So I forgot to measure this also before I stripped the rear axles out of the deuce. Can someone please tell me the pinion flange angle on the first (forward) rear axle of your stock deuce while setting on level ground. I'm assuming zero degrees or vertical, but I want to get it right the first time.

 

[steve6x6x6]

All three axles are the same, 0.0*

 

[gimpyrobb]

 

[Bcurtman]

Thanks guys. I'll have to modify my axle perches a bit to get that, but now's the time!