- 256
- 211
- 43
- Location
- Oahu, Hawaii
I used a cheap kline borescope today to look at the pistons while I am rebuilding the injectors. To me I'm afraid they may need replaced. I would rather have some help. The images aren't the best. 
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Piston assessment
- Thread starter USN_Green_Addict
- Start date
- 10,432
- 6,482
- 113
- Location
- Camp Wood/LC, TX
I don't see anything that stands out as cyl wall gouges. I would run it.
HDN
Well-known member
- 2,108
- 5,077
- 113
- Location
- Finger Lakes Region, NY
I think the pistons look alright. I don't see any surface cracks or edge damage. I'd run it too.
- 1,709
- 3,835
- 113
- Location
- Hidden Valley, Az
Me 3.
DG
DG
- 439
- 820
- 93
- Location
- Orygun
They look bored to me, add more fuel and a bigger turbo .
- 8,525
- 2,725
- 113
- Location
- Monrovia, Ca.
In the Cummins world, cracks were fine as long as they didn't go over the edge and start toward the lands. I see no issues.
I'd run it.
I'd run it.
msgjd
Well-known member
- 1,064
- 3,259
- 113
- Location
- upstate ny
Run it, driver