Plain steel 16.5 rim other than the stock 2-piece

[majorhavoc67]

I did a search through the wheel and tire threads but came up empty. I bought 4 new stock tires for the M1035A2 that I haven't received yet from GP. I'd like to find as close of a wheel that will fit my tires but get away from the stock 2-piece design. None of the shops in my area will touch an actual HMMWV wheel and I'm not able to do it myself. Any help would be appreciated

 

[Coug]

Do a google search for H1 wheels, and there are standard rims mixed in with the 2 piece for the search results

Example

HMMWV Humvee Wheel, Non-Ctis 16.5 One Piece HUMMER H1 6002010

*New* HMMWV Wheel 16.5'* 8.25 Civilian Hummer Hummer H1: 1992-2006 Part Number: 6002010 WHEEL 16.5 X 8.25 CIVILIAN HUMMER 7 in. to beadline 7.25 in. to "inside of beadline" THE CENTER HOLE IS 4.75”. If buying 3 or more this must go freight to the nearest freight terminal or a legal...

secoparts.net

 

[Mogman]

I did a search through the wheel and tire threads but came up empty. I bought 4 new stock tires for the M1035A2 that I haven't received yet from GP. I'd like to find as close of a wheel that will fit my tires but get away from the stock 2-piece design. None of the shops in my area will touch an actual HMMWV wheel and I'm not able to do it myself. Any help would be appreciated

They are not that hard, you don't even need any special tools, I am 66 and 3/4 broken down and I can still get them done no problem.

 

[majorhavoc67]

Do a google search for H1 wheels, and there are standard rims mixed in with the 2 piece for the search results

Example

HMMWV Humvee Wheel, Non-Ctis 16.5 One Piece HUMMER H1 6002010

*New* HMMWV Wheel 16.5'* 8.25 Civilian Hummer Hummer H1: 1992-2006 Part Number: 6002010 WHEEL 16.5 X 8.25 CIVILIAN HUMMER 7 in. to beadline 7.25 in. to "inside of beadline" THE CENTER HOLE IS 4.75”. If buying 3 or more this must go freight to the nearest freight terminal or a legal...

secoparts.net

Thank you. I looked up this wheel after I saw your post. Does it have the correct back spacing for a stock tire? I couldn't tell in the description

 

[Coug]

Thank you. I looked up this wheel after I saw your post. Does it have the correct back spacing for a stock tire? I couldn't tell in the description

From appearances, it's specifically for the H1 so should work properly on the HMMWV. The only difference I've seen between some H1 and HMMWV wheels is some H1 wheels are hub centric, rather than lug centric, and use flange nuts rather than tapered nuts to hold it to the hub.

 

[87cr250r]

If you have the option, ditch the 16.5". Tires are getting scarce. Going 17 inch opens up tons of lower cost higher quality tire options.