please ID trailer for me

[maddawg308]

Colemans used to have some, not anymore, all were sold or scrapped. They were single axle flatbeds, very wide, kinda like a kitchen trailer. Each corner had a leveling jack. Not a M103 or M353.

Any ideas?

 

[Recovry4x4]

I think Ryan Gill can answer that one. He had some odd ones based on the M103A3 chassis.

 

[pistonring]

Hi-
I have one of these 2 ton trailers that is a M390C. It was used on the hawk missile system. Two big leveling jacks at the rear corners and one in the front center. The 9:00-20 wheels track the outside tires of the Deuce duals, not the narrower track of the M105 trailers. This makes them a little more stable side to side. I use mine to take stationary farm engines to steam shows. The deck height is a little higher than i would like but with military stuff you can't be too picky. The pix are of GL trailers sold in the last 2 years or so. My trailer is not pictured. There was one sold last month at Fort Meade last month and was on the lot still last Friday when I was there to pick up my new to me M818 5 ton tractor. I think that this is what you are looking for. The deck is a full 8 feet wide and about 10 or 11 feet long. I have seen some with expanded metal decking. The one at Fort Meade had no decking at all. I think that a radar tracking unit was originally on these trailers. I always have wanted to mount a dummy Hawk on the trailer to drag around with the deuce for display fun. Maybe someday....
Thanks,
Pistonring, Elkton MD

 

[maddawg308]

That looks like the one I am looking for! Thanks!

 

[papercu]

I always have wanted to mount a dummy Hawk

Here is a dummy one being built. Wayne HAWK missile construction