PLGR Installation Kit Instructions

[nf6x]

I just picked up an installation kit for mounting an AN/PSN-11 "PLGR" GPS receiver in the HMMWV. Part number is 57K3233, NSN is 2590-01-420-4179, and Mr. Google tells me that it's the "old" style of installation kit. I wild-guessed that it's probably more appropriate for my truck than the "new" style, since my truck is outfitted with VRC-12 gear (to be replaced with first-gen SINCGARS stuff), not the fancy gear that I see in pictures of currently-fielded HMMWVs.

My kit still has all of the parts in their numbered baggies, but it didn't include the instruction sheet. I can probably figure out where everything goes based on pictures in the HMMWV parts manuals, but it'd still be nice to have the original installation instructions to work from. So, here's the long-shot question:

Does anybody out there have the installation instructions for this kit that they wouldn't mind scanning, copying or parting company with?

I'm attaching the eBay picture and the -24P diagram to show my love.

 

[nf6x]

Looks like the form software shrunk the -24P diagram, so here's an unshrunk version:

PLGR Installation Kit Diagram from HMMWV -24P TM » Mark's Green Pages

 

[emmado22]

That kit was deemed too complicated for use. All the PLGRs we had in HMMWVs in 4ID were mounted on simple 1x1 inch hollow stock with a bracker welded to it that bolted to the 2 holes were the radio rack bolts to.. Beltfed34 on ebay has them.

 

[nf6x]

I've seen those brackets in his eBay store. I may end up fabricating/modifying stuff anyway, because the stock kit mounts the PLGR on the right side, which is less useful in civilian applications where the driver and the commander share the left seat.

 

[emmado22]

If you can drive and read a PLGR and plot it on a map all at the same time, your the man.

 

[nf6x]

If you can drive and read a PLGR and plot it on a map all at the same time, your the man.

Well duh, what do you think the autopilot knob near the driver's right knee is for?