• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

Problem with Aux fuel throwing circuit breaker cb1 mep-802a

Status
Not open for further replies.

ribs1

New member
29
21
3
Location
Michigan
OK,
So, generator runs fine on main tank. When I set it to aux fuel it sometimes runs for a while then trips cb1
After this it will throw the breaker as soon as I turn the main switch to aux prime and run. Pump runs for about 2-3 seconds the circuit breaker trips.
Thanks for any tips
 

Ray70

Well-known member
2,332
4,935
113
Location
West greenwich/RI
I'd pull off the rear cover to access the fuel pump.
Unplug 1 item at a time and retest to observe when the problem goes away.
Start with the pump itself.
If the issue remains, unplug the dual float assembly ( if you're unsure of what I mean just ask )
If the issue still remains, unplug the float control module mounted to the right of the tank when looking at the tank.
Let us know what results you get.
 
Status
Not open for further replies.
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks