MakersTeleMark
Member
- 408
- 0
- 16
- Location
- Colo.
I did a search and couldn't find an answer.
When using the springs from the Boyce bob kit, when they are centered on the locating pin on the axle they are way too wide to mount the perches to the frame.
Do folks grind off the locating pin?
What keeps the springs/axle from moving sideways?
Thanks in advance.
When using the springs from the Boyce bob kit, when they are centered on the locating pin on the axle they are way too wide to mount the perches to the frame.
Do folks grind off the locating pin?
What keeps the springs/axle from moving sideways?
Thanks in advance.