yolner
Active member
- 393
- 68
- 28
- Location
- Rockville, MD
Some of you probably saw my other thread about rust under the tandem plate. Got both plates off and decided to take off the spring seat assemblies to look at everything in there. Unfortunately I think I found a serious problem. Looks like the solid bearing block wore a deep groove into the trunnion. Just want to confirm that this much wear means the trunnion is junk. See picture below. Thanks![20201018_115719.jpg 20201018_115719.jpg](https://www.steelsoldiers.com/data/attachments/570/570764-fcec2feda8f596ae57fbf78f87b484f9.jpg)
![20201018_115719.jpg 20201018_115719.jpg](https://www.steelsoldiers.com/data/attachments/570/570764-fcec2feda8f596ae57fbf78f87b484f9.jpg)
![20201018_115719.jpg 20201018_115719.jpg](https://www.steelsoldiers.com/data/attachments/570/570764-fcec2feda8f596ae57fbf78f87b484f9.jpg)
![20201018_115719.jpg 20201018_115719.jpg](https://www.steelsoldiers.com/data/attachments/570/570764-fcec2feda8f596ae57fbf78f87b484f9.jpg)