• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

Remote Brake Reservoir- Bubbles when brake applied

Dbluff

Member
27
39
13
Location
South Carolina
SS - Hi, just installed BM remote brake reservoir. When applying brake lots of bubbles come up to it and push a lot of fluid out.

Any thoughts?

Bleed all brakes now?
 

gimpyrobb

dumpsterlandingfromorbit!
27,785
747
113
Location
Cincy Ohio
Some air will be normal as you are pushing fluid from the remote reservoir into the master reservoir. If you didn't open any of the brake lines you should not need to bleed them.
 

Dbluff

Member
27
39
13
Location
South Carolina
Thinking to amount of fluid I put in, it may have been quite low…

Prob need to bleed, is it pass rear furthest away to do the bleed??

Some air will be normal as you are pushing fluid from the remote reservoir into the master reservoir. If you didn't open any of the brake lines you should not need to bleed them.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks