• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

SINGLES AND SUPER SINGLES

Wild Bill

New member
10
1
0
[1][/1][1][/1]<font color="black"></font id="black"><font color="black"></font id="black">
I want to run singles on my deuce and I was wondering - do I just turn the the inner dual
around so the deep dish shows to the outside?
Is there a spacer or anything to bring the tire
and wheel out to line up with the front tires?
And do I use the inner lug nuts to secure the
wheel.

Also, does anyone know if I can trade in my nearly new 9:00X20's on some 12:00X20's???

Any ideas or advise would be greatly appreciated.

Wild Bill
 

ironhorsethegeneral

New member
709
11
0
Location
Acworth, GA
The inner and outer bearings are different but the bearing races are the same. You can flip the hub around punch out your lug bolts and put them in the other direction or if you feel like spending a little money buy 4 front wheel drive hubs 2 left and 2 rights,right hand threads. Take off the brake drum from the plate and use as is. Bolt on your regular rear drums and shove them in. All front wheel hubs and rear wheel hubs are all the same part. Just reconfigured differently. This is what we did. Hope it helps. You will use the front lug nuts on all wheels now.<img src="emoticons/icon_smile_paw.gif" alt="Paw">
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks