REDWOLF
New member
- 428
- 0
- 0
- Location
- Risingsun Maryland
I may need a slave jump in Risingsun, NE Maryland are. Just checking to see if anyone lives close that could help me out. I have the slave cable. 
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Slave jump needed maybe?
- Thread starter REDWOLF
- Start date
K9Vic
Active member
- 1,261
- 7
- 38
- Location
- Fort Worth, TX
Remove the batteries or just disconnect all the cables and charge each one individually.
You can also jump start it by hooking to the front battery ONLY, do NOT connect to the rear battery. This might give you enough power to start the truck. I have jump started a CUCV doing this, but the rear battery had some juice still.
You can also jump start it by hooking to the front battery ONLY, do NOT connect to the rear battery. This might give you enough power to start the truck. I have jump started a CUCV doing this, but the rear battery had some juice still.
REDWOLF
New member
- 428
- 0
- 0
- Location
- Risingsun Maryland
Yea if had did it that way before when i first got her going, just weeing if there was anyone close to me that we could do the slave cable jump if i needed it. ![[thumbzup]](https://www.steelsoldiers.com/images/smilies/icon_smile_thumzup.gif "Thumbs Up [thumbzup]")