• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

soft straight line camo

Coffey1

Well-known member
Steel Soldiers Supporter
3,871
497
83
Location
Gray Court SC
I really like the look of the side.and you have done a excellent job but the nose in my opinion has too much black.
If the front looked like the side it would be perfect.

What paint did you use.
 

lakeydna

Member
86
3
8
Location
Devon, AB
I thought so too. But that's the nato pattern. Next time I would switch the brown and black. You don't notice the black as much when the base is green.
 

lakeydna

Member
86
3
8
Location
Devon, AB
Paint was Blair Jones from nisku coatings. When I ordered the paint they mix it and will put part of the gallons they mix into aerosol so i have spare for touch ups.
 

jasonjc

Well-known member
5,326
289
83
Location
Gravette Ar.
Nice work on the paint job. Too much black for me, some one else too day showed one with sand ,tan and brown that looked good. But that's just me. I do like the work thought.:goodjob:
 

M813rc

Well-known member
Steel Soldiers Supporter
4,209
3,205
113
Location
Near Austin, Texas
If you had described what you were going to do, I would likely have raised an eyebrow at you and given you the buffalo look, but seeing it, it actually looks pretty darn cool!
Don't forget to post a picture once the masking is off. ;)

The variation suggested earlier, with the brown and black switched, sounds interesting too.

Cheers
 
Top