SPEEDOMETER CALIBRATION FOR A1R

[m-35tom]

No doubt someone here has already done this. The PPM on a stock A1R is set at 62619. Reducing this number makes the speedometer read higher. I roughly figured that 45398 would be very close to correct but it seems to read to high. Any one done this? And yes I know I can tweak this with a GPS but some other people may need to know this number also. It is set in the Cat ET software.

 

[Third From Texas]

For highway gears or are you replacing the speedometer?

 

[Third From Texas]

This is the only thread that I have bookmarked and it seems to cover only the A0 with 3.07 gears. You've likely been thru it already.

A0 High Speed Gears - Speedometer Dip Switch Adjustment

Does anyone know the proper dip switch sequence on the back of the A0 speedometer to adjust for high speed gears? Thanks

www.steelsoldiers.com

 

[m-35tom]

likely!! changing gears on an A1R, I would think someone has done this already?

 

[Third From Texas]

Oh they have. I vaguely recall it discussed before I got mine, but I don't have it bookmarked.

I've got the cruise control info, but nothing on the speedo.

 

[m-35tom]

cruise is easy, we sell kits.