Spindle/Hub Nut Retainer M101A3

[John Galt]

Spindle/Hub Nut Retainer or Castle Nut M101A3

Can anyone point me to a source for replacement retainers or castle nuts?

Working on an M101A3 and the retainer was missing on one side. At least the person that left it off stuck the cotter pin back in.....

Found castle nuts and retainers online but cant tell if they extend far enough to reach the cotter pin hole.

Could also use a lead on new grease caps.

Thanks.

 

[John Galt]

Can anyone confirm the thread diameter and pitch?

 

[porkysplace]

Search partstarget http://www.parttarget.com/ by using the nsn for the part.

 

[gringeltaube]

... or wait until someone went out and actually measured one... : 1"-14 TPI


If you search for SPINDLE AXLE NUT RETAINER 12313042 (one of the popular E-sites) there is at least one...


G.

 

[John Galt]

... or wait until someone went out and actually measured one... : 1"-14 TPI


If you search for SPINDLE AXLE NUT RETAINER 12313042 (one of the popular E-sites) there is at least one...


G.

Thank you! I pirated a retainer from another trailer but its nice to have the replacement ordered.

I think found the grease caps on E-trailer. Will see how they fit.

https://www.etrailer.com/p-RG04-100.html