Rebelpride
New member
- 468
- 5
- 0
- Location
- Thomasville, NC
Hey Guys, been out of the loop for about 4 months now, and was wondering where or who has the best deal on super single rims for a deuce?
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Super Single Rims-WTB
- Thread starter Rebelpride
- Start date
Sephirothq
Well-known member
- 1,423
- 26
- 48
- Location
- Trevorton / PA
Some guys are making them out of HEMITT rims. there are some in the classifieds section.
I have some unmodified rims in PA for $75 but they are the 10 lug for the 5 tons not eh 6 lug for the deuce.
I have some unmodified rims in PA for $75 but they are the 10 lug for the 5 tons not eh 6 lug for the deuce.
- 8,489
- 2,637
- 113
- Location
- Monrovia, Ca.
What size tire are you planning to run?
73X
New member
- 311
- 9
- 0
- Location
- Farmington Hills, MI
If you want HEMTT wheels send a pm to M1057. I bought seven wheels for $50.00 ea. o-rings and nuts included.
I can help you with the plates to adapt over to the deuce pattern. I pay approx. $25.00 per 5/8 1020 grade plate with a center hole of 6.125 without lug holes.
Good luck and let us know what you decide.
I can help you with the plates to adapt over to the deuce pattern. I pay approx. $25.00 per 5/8 1020 grade plate with a center hole of 6.125 without lug holes.
Good luck and let us know what you decide.
Last edited:
number9
Member
- 455
- 0
- 18
- Location
- Lexington, KY
How do you address the lug holes in the plates you are getting?
....
....
Last edited:
73X
New member
- 311
- 9
- 0
- Location
- Farmington Hills, MI
CNC mill and a few minutes programing a circular interpolation.
Blood_of_Tyrants
Active member
- 1,614
- 10
- 38
- Location
- Lebanon, TN
Do you make the centers?
- 1,391
- 381
- 83
- Location
- Feasterville, Pennsylvania
We ahve custom 1 piece super single wheels for M35A2 in sotck ready to ship
also have goodyear and michelin tires
Dave
www.easternsurplus.net
also have goodyear and michelin tires
Dave
www.easternsurplus.net
Attachments
gimpyrobb
dumpsterlandingfromorbit!
- 27,785
- 749
- 113
- Location
- Cincy Ohio
Hey bud, WELCOME BACK! If you would, gimme a call, still got the #?
73X
New member
- 311
- 9
- 0
- Location
- Farmington Hills, MI
Yes, I made mine. I could not understand why the price for centers was so high so I made my own to see how involved or difficult it might be. After the initial program was input total time to machine on an Okuma CNC mill was less than five minutes each.
I welded the blank in the wheel first then ran the wheel centered on a 6.125 arbor and held it down with four Destaco clamps. The hardest part was moving the wheels around when fully assembled. Those bad boys are heavy.
gimpyrobb
dumpsterlandingfromorbit!
- 27,785
- 749
- 113
- Location
- Cincy Ohio
No CHIT!
73X
New member
- 311
- 9
- 0
- Location
- Farmington Hills, MI
Nope no CHIT 