Topper Identity?

[leisman7]

I recently picked up a military hard sided canopy that I’m unable to identify which trailer it matches with based on the ID tag. Doesn’t seem to be alot of information out there on this specific model. Does anyone have any good intel?

Model: 1651
Serial number: E0121H05
Manufactured date: Oct 2004

 

[Coug]

Looks kind of like the one for the M101A3

M101A3 enclosure dimensions

Just purchased an M101A3 with an enclosure and am wonder how tall it is inside. Looked at the TM and was able to find the length (96") and width (65"), but didn't see anything about the enclosures. Can anyone tell me how tall it is inside? Thanks.

www.steelsoldiers.com

 

[leisman7]

Looks kind of like the one for the M101A3

M101A3 enclosure dimensions

Just purchased an M101A3 with an enclosure and am wonder how tall it is inside. Looked at the TM and was able to find the length (96") and width (65"), but didn't see anything about the enclosures. Can anyone tell me how tall it is inside? Thanks.

www.steelsoldiers.com

Any chance you’ve measured rail to rail? Where the toppers would mount

 

[Coug]

Any chance you’ve measured rail to rail? Where the toppers would mount

Not my thread, so no, I don't have those dimensions.

However, the actual M101A3 bed inside dimensions are 65" wide and 96" long, which would match your 71" wide and 99" wide with 3" on each side rail, 3" on the front rail, and flush with the rear of the bed.

 

[leisman7]

Not my thread, so no, I don't have those dimensions.

However, the actual M101A3 bed inside dimensions are 65" wide and 96" long, which would match your 71" wide and 99" wide with 3" on each side rail, 3" on the front rail, and flush with the rear of the bed.

that’s a great point. Thank you!