tranny input shaft seal

[DaveP]

can any one tell me the part number for the imput shaft seal on the M109 transmission (duece). a friend (citizensoldier) just bought one and drove it 200 miles home and the front seal is toast. we were hoping to replace it in the morning.

 

[eddiec]

dave, get ahold of lance, he just went through his tranny, so i'm sure he'll have the part #.

 

[DaveP]

thanks Eddie. i will shoot him a note.

 

[gringeltaube]

There is no seal at the input of the deuce tranny.
Confirm correct fluid level in the tranny.
What about the engine oil level? If overfilled it could blow by the engine rear main seal.

 

[devilman96]

 

[Recovry4x4]

...and the reason for this is when the fording kit is installed and you pressurize the bellhousing, it also pressurizes the transmission.

 

[DaveP]

tranny fluid level was correct. it was 90 wt that was leaking out the front. pulled the tranny today. talked with hookin1 and figured out what it needs. we are looking for a trans used or rebuilt so we can get this thing running by tuesday morning for the Grayling trail ride. anyone with an extra trans please let me know. i dont think we have time to get the parts to rebuild this one and get it back in by monday night.