• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

VSS-3a

patracy

Administrator
Staff member
Administrator
14,575
4,588
113
Location
Buchanan, GA
So @wgtactical gave me a little project. A VSS-3A spotlight setup. Or at least the spotlight of it and new amphenol connectors to make a cable for it. After a lot of digging, I found a person who happened to have a number of the correct control boxes for the VSS-3A. Side note, there are two units, a VSS-3 and a VSS-3A. The two are similar in output and input requirements, but different completely on the control side of things. (DO NOT USE A VSS-3 controller on a "A" spotlight or vice-versa, DAMAGE WILL OCCUR!) Anyhow this was a fun little project. I believe it will end up being installed on the Ferret and the custom turret I'm building. (Ooops I let that cat out of the bag) I've duplicated a weapon pintle to be used in a vehicle weapon mount. I've also added a 24v linear actuator to handle tilt up and down. Pan will be with the turret rotation. I used some high carbon tool steel for the pintle, I hardened it and quenched it afterwards. The cable I made up with some 14awg wire I had laying around along with some welding cable for the main power leads. I sheathed it in some webbed sheathing as well for a proper look. I believe there's two conductors in the umbilical between the controller and the light that are unused. I plan on using these to feed power to the linear actuator and adding a toggle to control the light tilt from the control panel. This has been a fun little project. I'll have to bring it down to Gerald and play on the back 40 at night. The only annoying part of this has been with the light focal and mode motors. Both of them had seized up. I had to disassemble most of the light to pull them out and clean them up and get them moving again.

This sucker is BRIGHT. It's rated at 150 million candlepower. The TM stresses caution about personal being at risk by looking in the beam within 200 meters. I completely believe it now. I can say that my eyes ached after only about 15 minutes of playing with it and not looking at it directly. (Yeah @steelsoldiers I know I shoulda been wearing some kind of glasses) I did get a little froggy and flipped it to IR and turned my head away and stuck my hand into the path. My hand got toasty fast. The last pic is of the fire tower at the shop. It's about 100ft up in the air and covered in rust. It's a good 20 yards away from where I had it setup. Notice how white the observation house looks!

Gerald is gonna cut some silhouettes to go over it. Like the bat signal and a few other ideas we have....

BTW, if you have a VSS-3A spotlight but no controller, hit me up. I have a few spare control units and can help you out with building the cable.

101545618_3194465343908963_3717574814966218752_o.jpg

104698948_3241650462523784_8424731207003649442_o.jpg

105305144_3241650545857109_1969544635264741095_o.jpg

106913716_3294795070542656_4116141804161333112_o.jpg107132408_3294795130542650_4105039354878851439_o.jpg

110994703_3321218787900284_4392147239853459247_o.jpg117301870_3379693498719479_1339075602896253299_o.jpg

117968295_3403404756348353_4155280622282307477_o.jpg

118195568_3406695939352568_552366258344510518_o.jpg 118007124_3406695999352562_4861186858816475011_o.jpg
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks