• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Washington to Southern Calif anyone?

odSteve

New member
8
0
3
Location
Susanville, California
Hi,
Although I've been lurking here for awhile, this is my 2nd post here. Apparently my first post was deleted because I included a link to a picture of what I need transported, and apparently that isn't allowed.
So here is my second post attempt - with no pictures this time.

I need a few parts transported from Mt. Vernon, Washington to Van Nuys, California, preferably within the next few weeks.

The parts consist of an IH 5 speed transmission with attached bell housing, 205 transfer case, bracket, clutch, pressure plate, jack shaft (very short drive shaft), and flywheel from a small V8.

The trans and transfer case have been drained of oil, and everything is banded to a pallet and ready to go now. However you can ship the parts loose if that would be easier for you.

If you have any room in the back of your trailer or pickup truck, your help would be appreciated.

Thank you, sir.

Steve

*************************************************
New post:
Didn't want to bump this, but I found someone who will be picking up my parts Saturday, April 19th.
Thank you all for your help and suggestions.
Steve
*************************************************
 
Last edited:

divingrocks

Banned
5
0
0
Location
Valhalla, Asguard
it's the MVCC event near Lodi, CA
Folks come down to it from your area and up to it from Socal...perhaps you can work with some of them...look around here for info or go on the G503 forum
 
Top