CGarbee
Well-known member
- 2,459
- 530
- 113
- Location
- Raleigh, NC
I've finally found some time to add some more content to my website. Got a few pages of event photos added (Veterans' Day Parade, NCMVPA Fall show in Hickory, trailriding in the Uwharrie National Forest OHVP, Blue M37 that I recently purchased, etc.):
See photo pages 46-49 located at:
http://www.garbee.net/~cabell/photos46.htm
http://www.garbee.net/~cabell/photos47.htm
http://www.garbee.net/~cabell/photos48.htm
http://www.garbee.net/~cabell/photos49.htm
The captions for a couple of the pages need some work, so if you know the folks in them or can provide a better vehicle identification, please let me know...
I also added a detailed drawing of the Marine Corps rear lifting shackle relocation bracket to my USMC Modifications page (thanks to Bill L for providing the drawing and for Mark E for passing it along). Page is located at:
http://www.garbee.net/~cabell/usmcmodifications.htm
The drawing is in JPG form, so you can download it to your computer and print it out for use in fabricting a set. Adjustment of contrast tends to help make the dimensions a little easier to read depending on your printer settings...
Enjoy,
See photo pages 46-49 located at:
http://www.garbee.net/~cabell/photos46.htm
http://www.garbee.net/~cabell/photos47.htm
http://www.garbee.net/~cabell/photos48.htm
http://www.garbee.net/~cabell/photos49.htm
The captions for a couple of the pages need some work, so if you know the folks in them or can provide a better vehicle identification, please let me know...
I also added a detailed drawing of the Marine Corps rear lifting shackle relocation bracket to my USMC Modifications page (thanks to Bill L for providing the drawing and for Mark E for passing it along). Page is located at:
http://www.garbee.net/~cabell/usmcmodifications.htm
The drawing is in JPG form, so you can download it to your computer and print it out for use in fabricting a set. Adjustment of contrast tends to help make the dimensions a little easier to read depending on your printer settings...
Enjoy,