What high pressure pump is this?

[racing4funn]

This is my new 1993 M931A2. Im wanting to look up the mods for the high pressure pump but I cant identify this one


IF a bigger picture is needed take a look at the auction link

 

[Suprman]

Are you asking about the injector pump? It's a bosch p7100 type mechanical. The fuel screw is under a hex cover on top.

 

[racing4funn]

Yes I want to know what injector pump I have.
So these videos on post #18 on this thread is how I mod my pump?
And I have a Bosch MW
http://www.steelsoldiers.com/showth...-has-bumped-the-power-on-a-6CTA-cummins/page2

 

[Suprman]

Yup. Go 4 turns on the fuel screw to start and only one click each on the governor springs.

 

[racing4funn]

Yup. Go 4 turns on the fuel screw to start and only one click each on the governor springs.

Yeap 4 tuners counter clock wise on the fuel but I saw a recommendation or 3 to 4 clicks on the gov springs.. Is 3 ok?

 

[Suprman]

No only do one click each on the gov
springs its 1/4 turn. Once you do one and everything is ok then you can do one more. It wont idle right at 3 clicks sometimes at just 2. You can get new springs for the governor which is the right way to do it if you want to rev higher than 2400 rpms but remember the trans is only rated for 3k