Wheel cylinders

[jimm1009]

I looked at the cross reference and I know that the dealers have them, but has someone recently purchased a wheel cylinder from a local auto parts store for the M35 series trucks?
I have one that has a bad static leak so I purchased two new cylinders and four rebuild kits from one of our dealers but they will not be in until next week.
I would really like to replace that particular one today or tommorrow.
I did check with the local NAPA too but no joy there either.
I did not chek the local truck stop / maintenance garage yet but will do so too.
The only problem is that they go by application and you can't do that with one of our trucks.
Does anyone have a Bendix or Wagner part number for the cylinder?
Any suggestions would be greatly appreciated.

 

[doghead]

Try a search for "wagner wheel cylinder"! select search all terms. I found this thread that way! It has the info you seek! http://www.steelsoldiers.com/index....topic&t=12617&highlight=wagner+wheel+cylinder

Napa page, http://shortlinks.net/dlu500 Kinda pricey at $56.
OD Iron page, http://shortlinks.net/slc967 $23.39

 

[Westech]

in the cross is only the cups and springs. With a kit and a cylinder hone (about 10 bucks) you can rebuild them ez as pie