Wheel mouting studs

[jimm1009]

Could someone tell me what the thread size is on the front and back axles regarding the wheel studs? Can rear axle studs be put in the front hubs without machining the hubs?
Thanks,
Jim
jimm1009@yahoo.com

 

[Recovry4x4]

Can't give you a size but all the studs front and rear are the same except the left and right thread differences.

 

[chevycrew]

I just went and measured mine...they are 3/4" fine or 16tpi


Like kenny said, all the same front and rear.

 

[jimbo*]

I've got a dorman number for them at home, I'll check later today.
Jimbo

 

[BFR]

FWIW the hubs are the same too