Rocco
New member
- 377
- 2
- 0
- Location
- Lynchburg VA
Hey does anyone have a working fuel pump for the Duece?
And how much would they cost?
And how much would they cost?
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
who's got a fuel pump??
- Thread starter Rocco
- Start date
Rocco
New member
- 377
- 2
- 0
- Location
- Lynchburg VA
RE: who
That means im going to have to cut the copper fuel lines and tie it in?
Well whats going on is my fuel pump never worked
and since i have changed the fuel filters I will be driving and it gets air in the line and it turns off
But im guessing if I get the pump working it will not do that anymore?
Why all of a sudden it keeps acting up like this?
This is the second time I have changed the filters and now I have a problem.
The first time I never had a problem. but air keeps getting in,its not as bad this time.
but 3weeks ago it was getting a lot more air in it
I replaced the filter gaskets and its got better.
but today im driving down the highway and it shut down not fun.
That means im going to have to cut the copper fuel lines and tie it in?
Well whats going on is my fuel pump never worked
and since i have changed the fuel filters I will be driving and it gets air in the line and it turns off
But im guessing if I get the pump working it will not do that anymore?
Why all of a sudden it keeps acting up like this?
This is the second time I have changed the filters and now I have a problem.
The first time I never had a problem. but air keeps getting in,its not as bad this time.
but 3weeks ago it was getting a lot more air in it
I replaced the filter gaskets and its got better.
but today im driving down the highway and it shut down not fun.
Rocco
New member
- 377
- 2
- 0
- Location
- Lynchburg VA
RE: who
RPM's 1500-2000.
Its not the cans,
four different times I have messed with them.
engine transfer pump? Where is this located?
I will have wait till monday to get the pump.
so im gonna get NAPA# P4603HD.
Thanks for the help.
RPM's 1500-2000.
Its not the cans,
four different times I have messed with them.
engine transfer pump? Where is this located?
I will have wait till monday to get the pump.
so im gonna get NAPA# P4603HD.
Thanks for the help.
- 10,350
- 75
- 48
- Location
- Meadows of Dan, Virginia
RE: Re: RE: who
Make sure you bleed the air out of your lines and filters after changing anything. It's the little valve on top of the secondary/final filter bracket. Air in the system will shut you down at low rpms....you probably did this, but may be worth mentioning anyway...
Make sure you bleed the air out of your lines and filters after changing anything. It's the little valve on top of the secondary/final filter bracket. Air in the system will shut you down at low rpms....you probably did this, but may be worth mentioning anyway...