sermis
Active member
- 1,844
- 17
- 38
- Location
- Temple, TX
Found this the other day. Looks like some type of roller guide for a winch. Any idea what it is off of?
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Winch roller, what is it off of?
- Thread starter sermis
- Start date
- 7,584
- 363
- 83
- Location
- Cheyenne, WY
Stumped by that one; what it the coiled item by your foot? Is that cable? Looks like a spring???? By the way any luck on the 151A2?
sermis
Active member
- 1,844
- 17
- 38
- Location
- Temple, TX
The roller by the rubber will move from side to side. It did not feel like it had a spring inside but the rubber does keep the roller pushed to the one side but moves easily.
- 8,539
- 2,761
- 113
- Location
- Monrovia, Ca.
Any numbers stamped on it?
- 10,350
- 75
- 48
- Location
- Meadows of Dan, Virginia
The FMTV trucks have a "mid ships" mounted winch with guide rollers for forward or rear winching, perhaps it's one of the gudes?
Attachments
Jones
Well-known member
- 2,237
- 83
- 48
- Location
- Sacramento, California
I think this might be your mystery part.
Attachments
sermis
Active member
- 1,844
- 17
- 38
- Location
- Temple, TX
Found some #'s DS45152 and 187238UU under the first number. Numbers are hard to read.
Attachments
wanderingwillys
Member
- 276
- 22
- 18
- Location
- Hobart, WA
Looks like the cable guides on the 5 ton wrecker boom also... Might be the same assembly?